Industrial mechanical services to keep your facility running at optimum capacity
Are you dealing with razor-thin profit margins that can disappear with an equipment shutdown? With decades-long experience in troubleshooting and maintenance, Lee Industrial Contracting’s mechanical services experts specialize in the systems that keep your facility running efficiently. We can install and service everything from process piping to HVAC and compressed air systems.
QUALIFIED, CERTIFIED, FULLY SUPPLIED.
INVENTORY
When we say fully supplied, we don’t mean wait while we run to the store for parts. We pull stock from our massive in-house inventory every day. So, when we show up on your site, we’re fully equipped and ready to work.
SELF-PERFORMING
Will installing piping or duct systems require changes to your facility? With most contractors, that means hiring subs. No matter the complexity of your project, Lee Contracting’s in-house capabilities can handle every aspect of your job.
VALUE ENGINEERING
Ever looked at a job specification and wondered if it was overdesigned? For years now, we’ve seen ‘cut and paste’ specs cost more than the benefit they deliver. Because we make every detail justify itself, you get better operational and financial performance.
EVERYDAY SAFETY
Jobsite injuries are expensive and we take worker safety very seriously. Our Foremen are confined-space, OSHA 30 and First-Aid/CPR Trained. We require all of our Pipefitters to be OSHA 10 trained upon hire and we empower every employee on every job with stop work authority that is reinforced by our full-time dedicated safety department.
PIPEFITTING
Like the arteries and veins of the human body, piping systems keep things flowing. For years, commercial and industrial customers have relied on the knowledge and experience of Lee’s pipefitters for professional installation and maintenance of those systems like no one else. Adherence to safety and compliance standards guards against system failures, secondary damages and downtime. Our certified installers deliver faster turnaround and rapid emergency response.
TOTALLY COMMITTED. TOTALLY CAPABLE.
LICENSED JOURNEYMAN PLUMBERS
LICENSED MASTER PLUMBERS
ASSE BACKFLOW CERTIFIED
REGISTERED STATE OF MICHIGAN PLUMBING APPRENTICES
CERTIFIED WELDERS
REGISTERED DOL PIPEFITTING APPRENTICES
REGISTERED DOL HVAC APPRENTICES
LICENSED MECHANICAL CONTRACTORS
CAPABILITIES
As one of the few single-source industrial mechanical services contractors in the industry, Lee Contracting self-performs every aspect of large and small projects. With our combination of a fully-stocked parts and equipment inventory and certified installers, we keep your job moving forward. Our commitment to value engineering delivers the ideal combination of performance and cost-effectiveness from design to handoff.
- Certified Victaulic Installers, ASME B31.3 PVC and CPVC Bonder Qualification, Cone Thread Installation, Orbital Welding, ANSI/ASME B31 Qualified Welders for Carbon Steel and Stainless Steel Pipe and tube, Viega ProPress/MegaPress certified installers
- Quality Design, Installation and Repair of All Types of Piping Systems Including Vacuum Jacketed Piping, Hydrogen Piping, Stainless Steel Piping, Liquid Nitrogen (LN2) Piping and Complete Cooling Systems
- Complete Rough and Finish Plumbing Installations Including Water Distribution Piping, Backflow Installation, Backflow Certification and Service
- Pipe Freezing
- Hot Tapping
- Pipe Insulation Installation
- Chiller and Pump Skid Rental and Installation Available
- 24/7/365 Days a Year Emergency Service
- Fire Suppression System Design and Installation
SPECIALIZING IN PROCESS PIPING INSTALLATIONS
- Gas
- Hydraulic
- Nitrogen
- Argon
- Helium
- Hydrogen
- Liquid Nitrogen (LN2)
- Compressed Air
- Cooling Water
- Refrigeration
- Coolant
- Material Conveying
- Fuel
- Lube
- Steam & Condensate
- Slurry
MECHANICAL
Lee Contracting’s comprehensive mechanical services lines are built on the self-performing experience and expertise we’re known for industry-wide. From design and installation to maintenance and improvements, we’re the first choice of companies that expect the best.
INDUSTRIAL HVAC
Industrial HVAC systems are critical to maintaining equipment, process and employee effectiveness. From maintenance and repair to design, installation, retrofits, automation and controls, Lee Contracting can handle any phase of an HVAC project. Our factory trained and certified technicians keep your equipment running at optimal efficiency year-round.
Because we self-perform every phase of your HVAC work, you can count on us to have the necessary parts, tools, instrumentation and experience to install, maintain and repair every application of HVAC equipment, from small commercial through heavy industrial applications.
INSTALLATION
Lee delivers value engineered installations for every application.
- Dust Collection Systems
- Exhaust and Ventilation Systems
- Roof Top, Split or Ductless Systems
- Chiller Systems
- Refrigeration Piping
- Computer/Server Room Systems
- Environmental Chambers
- VRF Systems
- DOAS Units
- Infrared Tube Heaters
- Unit Heaters
SERVICE
Lee’s industrial mechanical experts provide turn-key services through every phase.
- System Design
- Installation
- Specialty Fabrication
- Scheduled Preventive Maintenance
- Diagnostics
- Corrective Maintenance/Repairs
- Renovation Projects
- Equipment Upgrades
- Air/Water Balancing
COMPRESSED AIR SYSTEMS
Clean, consistent compressed airflow is an absolute necessity for large and small plant operations. With our onsite and in-house service capabilities, we can test and perform routine maintenance of your compressed air systems. This can add years to your equipment’s lifespan and help prevent future problems.
With our massive parts inventory and trained technicians, you can rely on Lee to consistently meet your project timelines. Our auditors provide the ultimate in compressed air systems analysis and optimization, exceeding Compressed Air Challenge and DOE requirements.
24/7 PORTABLE EMERGENCY AIR ASSISTANCE
When air system problems threaten production, count on Lee Contracting to keep you operating. We have emergency chillers, compressors and air dryers ready for delivery to quickly resolve interruptions.
Equipment:
- Oil Flooded Rotary Screw Compressors – 3 Horsepower to 600 Horsepower
- Refrigerated Compressed Air Dryers
- High Efficiency Filters
- Oil Free Rotary Screw Compressors – All Sizes
- Cold Regenerated Desiccant Dryers
- Rental Air Compressors
- Complete Line of Accessories
Factory distributor & installer of:
- Boge Compressed Air Systems
- Chicago Pneumatics Air Systems
- Elgi Compressors
- Beko Mfg Compressed Air Treatment
- Great Lakes Air Products
Treatment and condensate management products for compressors, including:
- Oil Water Separators
- Coalescing Filters
- Particulate Filters
- Zero Loss Auto Drains
SHEET METAL FABRICATION
Design it. Bend it. Roll it. Shear it. Weld it. Build it. You’ve got the vision – we bring it to life. No matter the size or complexity of your fabrication project, Lee Contracting’s fabrication department’s fully stocked sheet metal shop can bring your vision to a physical reality.
We combine 2D and 3D AutoCAD, as well as SOLIDWORKS design capabilities, with value engineering to deliver the optimal mix of product performance and cost-efficiency your project deserves. Because we are 100% employee-owned, you get a start-to-finish commitment to excellence unrivaled by other fabricators.
